tires pyrolysis

1generate quality fuel with lower emission 2control plastic&tyre land pollution 3recover energy from waste 4help recycle char

 

 

 

                              Work process                                        

 

    Firstly make reactor rotate clockwise 0.4r/min, put raw material into reactor, close feeding door.

 

    Secondly, burned the fuel material(coal wood natural gas oil) in the furnace. reactor will be slowly heated , when the temperature reach aroud 180degrees, oil gas will come out, then go to cooling system and liquid to oil.

 

   Some incondensable gas which cant cooling down will be leaded to furnace through a gas pipe, it will be used to heat the reactor.

 

  This can save your energy, only the first 2hours use energy for heating, after ther first 2hours mainly use gas ,little energy is ok . after pyrolysis all the oil gas come out from reactor , the temperature will fall down, then make it rotate anticlockwise, carbon black discharging begins.

 

   Lastly when the temperature deduce to 50degrees, worker can opened the door of reactor take steel wire out.

 

   Then you can start the next batch

        

         Pyrolysis is process of molecular breakdown where    

   larger molecules are broken down into small molecules     

    Pyrolysis plant is an industry designed to carry out pyrolysis of waste plastic&tyres.

    In case of plastic&tyres pyrolysis, long chain polymer is broken down into smaller chains of hydrocarbon gas and pyrolysis oil.

    Heat and catalyst are required for the following reacton.

   In pyrolysis, the polymer waste is not burned, instead it is broken down into usable finished products like pyrolysis oil.  Hydrocarbon gas and charcoal.

   Plastic&tyre pyrolysis offers following benefits:

generates quality fuel with lower emissioncontrols plastic &tyre land pollutionrecover energy from wastehelp recycles carbon

   In case of waste plastic&tyre waste management, pyrolysis is better alternative compared to incineration or dumping.

  

   Incineration is burning of waste which leads to loss of valuable energy from polymer waste.

  

   Dumping of polymer waste is known to cause land pollution.

  

   By pyrolysis of polymer waste, it is possible to recover value from waste in the form of pyrolysis oil, hydrocarbon gas and charcoal..

                        The usage of final product                            

   1 fuel oil from waste tyres are used in below industries

   power plant factory  glass factory  cement factory ceramic factory aluminum factory boiler factory central heating factory painting factory

   2 carbon black from waste tyre are used in below industries

   electric able jacketing conveyor ban  hose and doormat  black nylon bag rubber additive automatic spare parts  heat isolation  black colorant in rubber materials plastic pipes  industries rubber products fire fighting

   3 steel wire from waste tyre can be re-sale to steel factory

   4.exhaust gas will recycle to furnace burn as energy

                                       Processing time                                         

Style	Feeding time (hours)	processing time (hours)	cooling time (hours)	Slag outlet time (hours)
RCZ-2200-5500	2	7	2	2
RCZ-2200-6000	2	8	2	2
RCZ-2200-6600	2	10	2-3	2-3
RCZ-2600-6600	2	13	3	2

                             motor power                                            

Items	Name	Power
1	Auto feeder	11kw
2	Draft fan	5.5kw
3	Vecuum system	5.5kw
4	Reducer	3kw
5	Welding machine	2.2kw

                                   Safety Precautions                               

  Waste tire/plastic pyrrolysis oil is a high risk industry. 

  It is strictly forbidden to operate without training or any practical experience. 

  1. Workers should be trained before operating this machine.

  2. Protective work uniform is a must for workers.

  3. The Chamber Feeding door, oil outlet, slagging door are flammable places.

     Don't stand in front of the doors when opening them.

  4. Blower should be turned off when adding coal.

  5. No smoking in factory.

  6. Check the oil outlet carefully before each batch to avoid jam or blockages.

  7. Check all pipes to ensure that the equipment runs safely.

  8. Safety devices are vital for machine's safe working. 

      Pressure and temperature gauges must all be checked regularly. 

      Water levels in condensers should be checked regularly.

   9. Workers must never sleep during operation.

  10. It is highly recommended that an appropriate fire extinguisher be available at all times.

   11. Interruptions or halting of the pyrrolysis process mid process should be avoided 

       if at all  possible.

       Equipment may be damaged if the amount of wet raw material is too large. 

      Similarity damage is done by overloading or sudden engaging or reversing of motors

 Note: Any damage caused by operating the equipment without technical guidance during  i nstallation, during debugging, or subsequent operation not in accordance with this manual, shall not be the responsibility of Henan RCZ. 

   Equipment Maintenance

equipment maintenance is particularly important for the life the whole machine

1 wheel bearings: these should be lubricated before every new batch is done

2 Motor: reducers should be lubricated periodically , ensure bearing lubrication

3 V-belt: regular inspection and replacement

4 Chain: this should be lubricated with grease for each batch

5 Draft fan: regular inspection and lubrication

6 keep oil channel clean and smooth

7 electric inspection and maintenance , all connections should be done by a qualified electrician

8 pumps also need regular maintenance

tires pyrolysis